SAP & HEM Compliance Modelling
Full SAP 10.3 and Home Energy Model assessments certified by Elmhurst, Stroma and BRE-accredited assessors.
About this service
Part L 2026 introduces the Home Energy Model (HEM) — a half-hourly dynamic simulation that takes ~5× as long as legacy SAP. Our in-house assessors run both SAP 10.3 and HEM, deliver TER/DER calculations, PV output modelling and the full Building Control compliance pack. Same-week turnaround for typical 3-bed/4-bed types.
Who it's for
- Developers
- Architects
- Self-builders
- Self-certifying contractors
How we deliver it
Every sap & hem compliance modelling engagement follows the same four-stage process — design, modelling, installation and handover — with full SAP/HEM compliance documentation produced as part of the installation. We work to MCS standards and our installations are covered by a 20-year insurance-backed workmanship warranty.
The service is delivered nationwide. For developer-volume work (50+ plots) we apply bulk procurement pricing and factory pre-fit, typically delivering 20–30% below retail benchmark. For self-builders we offer per-plot pricing with full integration into your main contractor's programme.
Sap & hem compliance modelling for volume new-build programmes
Per-plot pricing locked at procurement. Factory pre-fit on panelised roof cassettes. SAP/HEM modelling for every house type included. NHBC, LABC, Premier and Buildmark warranty-accepted workmanship. 20-year insurance-backed system warranty. We work with developers from 50 plots to 5,000+ across multi-site frameworks — agreed pricing, agreed programme, agreed warranty stack.
Sap & hem compliance modelling for one-off custom builds
Engagement from RIBA Stage 2. PV sizing collaborative with the architect. SAP/HEM modelling that gives the architect freedom on glazing ratios and roof geometry. Building Control submission pack ready for the Approved Inspector. 0% VAT on new-build dwellings. Staged invoicing aligned to your self-build mortgage drawdowns. We work with custom-build buyers across England, Wales and Scotland.
How this fits into the FHS compliance pathway
Every FHS-compliant new build must pass three regulatory gates. Sap & hem compliance modelling fits primarily into the second gate — design-stage Part L compliance — but has knock-on implications for Building Control sign-off and post-completion warranty:
- 1 Planning permission Most solar PV on new dwellings is consented within the dwelling\'s primary planning consent. Conservation Areas, Article 4 directions and listed-curtilage plots require additional planning consideration — we handle the planning evidence required for these.
- 2 Building Control — Part L compliance SAP 10.3 or HEM compliance modelling demonstrating Dwelling Emission Rate ≤ Target Emission Rate. PV specification, ASHP capacity, fabric U-values and air permeability all entered into the modelling. We provide the full compliance file ready for the Approved Inspector.
- 3 Post-completion — warranty & EPC MCS certificate, EPC, monitoring app onboarding and 20-year insurance-backed workmanship warranty. NHBC, LABC, Premier and Buildmark all accept our installation specification without query — important if you\'re relying on a structural warranty for buyer mortgageability.
For a fuller walkthrough of the compliance process, see our Part L 2026 page and the FHS PV calculator which sizes a compliant system from your ground floor area in 30 seconds.
Frequently asked questions
Can you handle SAP and HEM?
How long does a HEM assessment take?
What does HEM cost?
Other services
Specialist services covering every step of FHS-compliant new-build solar.
In-Roof Solar Integration
Factory-fitted in-roof PV systems integrated into the roof structure during construction — the FHS-default specification.
Learn more →Building Integrated Photovoltaics (BIPV)
Solar tiles, solar slates and PV-glass facades — for premium plots and Conservation Areas.
Learn more →SAP & HEM Compliance Modelling
Full SAP 10.3 and Home Energy Model assessments certified by Elmhurst, Stroma and BRE-accredited assessors.
Learn more →Developer Procurement Packages
Bulk solar+battery+ASHP packages priced per-plot across whole sites.
Learn more →Battery Storage Integration
AC-coupled and DC-coupled batteries sized for FHS half-hourly self-consumption modelling.
Learn more →EV Charge Point Integration
Solar-aware EV charging that diverts surplus PV to the car instead of export.
Learn more →Heat Pump Integration (ASHP)
Solar-paired air source heat pumps — the standard FHS heating package.
Learn more →Solar Panel Maintenance & Servicing
20-year insurance-backed workmanship + annual solar panel servicing + remote performance monitoring as standard on every new build.
Learn more →Get an FHS-compliant solar quote in 48 hours
Tell us your plot details — ground floor area, location and target start-on-site date. We return a fully-costed system sized to Part L 2026 (40% PV rule), with the SAP/HEM compliance pack included.